Tilecoat Advanced

Preparation

• The roof area must be thoroughly cleaned, prior to application of the coating in order to remove accumulated dirt, debris, bird faeces, moss, lichen, fungus and all other detritus materials and free from latiance before application.
• The area to be coated must be pressure washed to remove all substrate contaminates. Care must be taken not to damage the roof structure, whilst pressure washing. Replace any damaged tiles prior to coating.
• The fungicidal wash solution is best applied by brush, to allow a thorough substrate penetration.
• The fungicidal wash solution should be applied at a rate of 10-20 square metres per litre.
• After application the roof should be allowed to dry completely and then inspected to ensure a uniform substrate coverage and that there is no water trapped in joints between the tiles.

Application

• STIR WELL BEFORE USE.
• Tilecoat can be sprayed NEAT but may be THINNED with water up to 10% for the first coat and 5% for the final coat.
• All tile coating work should be carried out in dry conditions and without the forecast of precipitation or frost, within 6 hours of applying the coat.
• No coating should be carried out in times of condensation conditions or when the relative humidity exceeds 90%.
• No coating should be carried out when the substrate temperature is below 5°C or above 35°C.
• The maximum permissible moisture content of the substrate is 21%.
• If possible do not apply the coating when the roof tiles are very hot, in order that premature surface drying and poor substrate wetting does not occur.
• When dry after a minimum of 4-6 hours drying the second coat of material may be applied.
• Note: During the summer months there is a possibility of paint skinning from warm weather/transportation (top of inside lid and rim). We recommend that the paint is pre-filtered on site through a course filter to remove skins before spraying.

For detailed application advice refer to the Product Datasheet

Technical Datasheets

• Tilecoat Advanced

Safety Datasheets

• TILE COATING - WINTER GREEN

• TILE COATING - TERRACOTTA

• TILE COATING - RED

• TILE COATING - DARK GREY

• TILE COATING - BROWN

• TILE COATING - ANTHRACITE GREY

IMPORTANT SHIPPING & DELIVERY INFORMATION

• Please allow 2-3 working days for delivery.
• Saturdays and Sundays, as well as Bank Holidays, are not classed as working days.
• Orders placed after the cut-off of 4pm will not be processed for earliest dispatch until 9am the next working day.
• Any orders placed after 11am on Fridays, over the weekend or on a bank holiday, will be processed the next working day.
• All delivery costs below are including VAT.

Delivery Options

Standard Shipping - Mainland England & Wales

All orders below £100.00

£12.00

Standard Shipping - Scotland inc. Highlands

All orders below £100.00

£18.00

Free Shipping

All orders above £100.00

Free